Open your hood, obviously. The first thing you are going to do is remove the front air intake duct. To do this, use a pair of pliers and pull the marked pins up.
Remove the front duct.
We are going to install the drive side duct first. The scoop will go in from the bottom as pictured.
Once the driver side scoop is in place, it will line up like this.
Hold the driver sid plate in place. You are now going to drill (1/8 drillbit) the first hole. See picture. After drilling the first hole, secure the scoop with the provided screw (do NOT over tighten). Once one of the sides is secure, drill the second hole and install the second screw.
The passenger side ram air plate will install the same way as the driver side. The plate will go in from the bottom as pictured.
The passenger side plate will have a tighter fit. Push the plate backwards (pictured) and hold it in place for the drilling. Drill one side first, then secure it with the screw. Once one side is secure, drill the second hole.
Once both scoops are installed, install the front intake duct.